SOLAR  POWER  BATTERY

                      SPEC

  READ THE OPERATING  INSTRUCTIONS

   CAREFULLY FOR CORRECT  OPERATION.

   CONNECTION THROUGH A CIGARETTE LUGHTER SOCKET

.

    SOCKET

1.       connect power cable into the unit,then connect the other 12V power socket.Ensure that the connectors at both hands a sockets. The unit will begin sending atrickle charge as soon sa it is ex blinking LED will begin operating as soon as the power socket it is exposed daylight.it will NOT Blink if not enough daylight conversion by the panel. The unit will continue to send power as long as it exposed to light.

     CONNECTION DIRECTLY TO BATTERY

1.       Cut off cigarette lighter and strip the wire assembly close to expose ends of the 2 wires

2.       Connect a 5 map inline fuse to the positive(white) wire

3.       Connect the negative wire(black) to the battery ensuring that negative is on the battery.Connect the positive wire(white)to the matching white to positive on battery.  The  unit can be left connected to the battery without fear of depleting the battery.

     INDOOR  MOUNTING

      You may choose to permanently mount the unit to the front or using self-tapping screws via the 2 mounting holes, however,it is recommended that the unit be properly stored underneath the front seat when the vehicle is in motion.

     OUTDOOR MOUNTING

     A clear silicone sealant sealant should be applied to all glass edges to protect the unit from moisture. For outdoor permanent mounting,remember to ensure sufficient added security.

     TOUBLESHOOTING

     LED not lit:

1.       Connector may be pushed into cigarette lighter socket too deeply.

2.       The LED lifetime is limited. A burnt LED does not affect the performance of the panel.

PRODUCT Character: pre-wired For lmmediate Operation

                   Ensures Quick Starts

                   Works Under Cloudiest Conditions

                    Zero Maitaience

                    Weather/ Rust/ UV Resistant Frame

                    Easy To Assemble

 Power: 1.5Watt   Voltage: DC 12V/100mA    Frame: ABS Plastic